Affordable Tactical Supply LLC
Warning letterThis gun manufacturer was cited for 13 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
ATF data indicates that this license is no longer active.
Address
705 State Hwy 78 S
Farmersville, TX 75442
Collin County
License
Number | 5-75-085-07-7C-09544 |
Type | Manufacturer of firearms |
Expiry | License inactive |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 63 hours conducting this inspection. 68 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Expedited SW inspection with a possible cease and desist. Conduct a Full Manufacturer of Firearms Compliance Inspection with emphasis on SWBI. Obtain EIN and/or SSN for updating Licensing Center records. A full inventory is required. As appropriate, discuss whether the records contain all of the required information, are accurate and are timely recorded including the submission of the AFMER (5300.11). Describe any manufacturing processes. Ensure compliance with all marking requirements. Indicate the nature of any discrepancies. Please obtain the GPS coordinates for the premises. In N-Spect add last inspection date and check all applicable boxes (Gun shows, internet sales, and NFA ) as well as add High Risk Inspection.
Add Dorinda Kay Varner as responsible person to the license and remove redacted as responsible persons Update FLS to reflect new business telphone number as 972-784-9007 and new business fax number as 972-784-9009. See Exhibit 5 for change in control letter. This inspection documented one violation that rises to the warning conference level. Specifically, the licensee failed to properly mark assembled/manufactured firearms on redacted occasions by failing to engrave the manufacturer’s name, city and state. The licensee stated she has only assembled/manufactured redacted firearms and has not disposed of any of these firearms. The licensee stated she was not aware of the marking requirements for assembled firearms and that she did not have the necessary equipment to mark the firearms as required. The licensee ultimately disassembled the firearms and re-entered the lower receivers back into inventory. This was the licensee’s first compliance inspection. I recommend a warning letter only and recall inspection in lieu of a warning conference
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 13 violations.
Citation | Description | |
---|---|---|
478.54 | Failure to give written notification of a change of control in a corporation or association that holds a license. 🔗 | |
478.50 | Conducting business at a location away from the licensed premises. 🔗 | |
478.123(a) | Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗 | |
478.123(b) | Failure by a manufacturer to maintain an accurate record of dispositions to other licensees. 🔗 | |
478.123(d) | Failure by a manufacturer to maintain an accurate record of dispositions to non-licensees. 🔗 | |
478.21(a) | Failure to provide all of the information called for in required forms. 🔗 | |
478.124(c)(1) | Failure to obtain a Form 4473 showing the transferee's name, sex, address, date and place of birth, and other required information. 🔗 | |
478.124(c)(3)(i) | Failure to obtain identification from a transferee or document it on Form 4473. 🔗 | |
478.124(c)(3)(iv) | Failure to record the date NICS was contacted and the NICS response on Form 4473. 🔗 | |
478.124(c)(5) | Failure of the licensee to sign or date a Form 4473. 🔗 | |
478.126a | Failure to report the sale of two or more pistols or revolvers to an individual during five consecutive business days. 🔗 | |
478.92(a)(1)(ii)(C) | Failure by a manufacturer or importer to mark frames or receivers with its name and the name of the foreign manufacturer if applicable. 🔗 | |
478.92(a)(1)(ii)(D) | Failure by a manufacturer or importer to mark frames or receivers with the city and state where the manufacturer is located. 🔗 |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »