Burgin, Edgar Frank Jr.
Halfcocked GunsmithingWarning letter
This gun manufacturer was cited for 2 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
ATF data indicates that this license is no longer active.
|Type||Manufacturer of firearms|
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 38 hours conducting this inspection. 25 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Full Compliance Inspection and COA, with emphasis on manufacturing 80% receivers. See email from DIO in A/O file or electronic file. Also AFMER reports and obtain completed amended application.
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 2 violations.
|1||478.123(d)||Failure by a manufacturer to maintain an accurate record of dispositions to non-licensees. 🔗|
|2||18 USC 923(g)(5)(A)||Failure to submit record information required by the Attorney General. (This citation is often used to enforce the requirement for licensees in Southwest border states to report multiple sales of semi-automatic rifles.) 🔗|
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »