Cross Machine Tool Co. Inc
This gun manufacturer was cited for 2 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
|Type||Manufacturer of firearms|
|Expiry||Jun 1, 2021|
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 93 hours conducting this inspection. 137 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Inspect after 1/26/17.
Two violations were disclosed during this inspection, of which one was a repeat violation. CMT is a high volume manufacturer. It is recommended that the licensee receive a second Warning Letter only (due to change in control violation) without a recall inspection .
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 2 violations.
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »