DK Enterprises Of America Inc

DK Enterprises

Warning letter

This gun manufacturer was cited for 2 violations. The inspection resulted in a warning letter.

A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.


2025 Olde Towne Drive
Monroe, NC 28110
Union County


Number 1-56-179-07-8M-07937
Type Manufacturer of firearms
Expiry Dec 1, 2021

Inspection Timeline

Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.

This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.

Officers spent a total of 24 hours conducting this inspection. 30 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.

Hover over underlined text to see definitions of common terms.

Oct 24, 2016
Inspection assigned


Nov 16, 2016
Officer's recommendation Submitted by Industry Operations Investigator
Warning conference
Nov 17, 2016
Review Signed by Area Supervisor
Warning conference

Concur with IOI redacted recommendation of WC with WL and Recall

Nov 23, 2016
Final review Signed by SBALBRO – Director, Industry Operations
Warning letter

Due to the licensee's compliance history and relatively low volume a warning letter is recommended by the DIO .

Nov 28, 2016
Warning letter sent


If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.

This licensee was cited for 2 violations.

1 478.123(a) Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗
2 479.102(a)(2) Failure by a manufacturer or importer of NFA firearms to mark frames or receivers with information including the model, caliber, and the manufacturer and/or importer's name and location. 🔗

Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »