Dresner, Michael Jacob
Law Enforcement SalesWarning letter
This gun manufacturer was cited for 6 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
|Type||Manufacturer of firearms|
|Expiry||Dec 1, 2022|
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 54 hours conducting this inspection. 64 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Mr. Dresner was fully cooperative during the inspection and immediately corrected the errors when possible. Although the licensee had six violations, it appears a Warning Letter only with no recall inspection is appropriate.
Dresner, Michael Law Enforcement Sales 1-62-145-07-6M-04956 Lead IO redacted Insp Date This investigation disclosed six violations with a recommendaiton of a W/L. I concur with the findings and recommendation of this investigation.
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 6 violations.
|1||478.21(a)||Failure to provide all of the information called for in required forms. 🔗|
|2||478.126a||Failure to report the sale of two or more pistols or revolvers to an individual during five consecutive business days. 🔗|
|3||478.123(d)||Failure by a manufacturer to maintain an accurate record of dispositions to non-licensees. 🔗|
|4||478.92(a)(1)(ii)(C)||Failure by a manufacturer or importer to mark frames or receivers with its name and the name of the foreign manufacturer if applicable. 🔗|
|5||478.123(a)||Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗|
|6||478.123(b)||Failure by a manufacturer to maintain an accurate record of dispositions to other licensees. 🔗|
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »