Henry Wisconsin LLC
Warning letterThis gun manufacturer was cited for 3 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
ATF data indicates that this license is no longer active.
Address
107 W. Coleman
Rice Lake, WI 54868
Barron County
License
| Number | 3-39-005-07-6B-03022 |
| Type | Manufacturer of firearms |
| Expiry | License inactive |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 154.5 hours conducting this inspection. 298 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Verify information in attached disclosure and ensure firearms are now being properly marked prior to shipment.
Failure to mark a portion of firearms manufactured with all required markings merits consideration of a Warning Conference. However these firearms were marked with serial numbers and distributed to other FFLs for further manufacture and return. Once returned the firearms were marked with remaining required marks of ID prior to further distribution. The recommendation is Warning Letter only.
Violations merit consideration of a Warning Conference. However in consideration of the following 1) all improperly marked firearms were distr buted to FFLs for further manufacturing, returned, and then properly marked; 2) other violations as compared to volume of firearms manufcatured; and 3) corrective actions implemented — a Warning Letter is sufficient
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 3 violations.
| Citation | Description | |
|---|---|---|
| 478.123(a) | Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗 | |
| 478.123(b) | Failure by a manufacturer to maintain an accurate record of dispositions to other licensees. 🔗 | |
| 478.92(a)(1) | Failure by a manufacturer or importer to mark frames or receivers with required information. 🔗 |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »