James Allen Hubert
Warning letterThis gun manufacturer was cited for 6 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
Address
18 Lithgow Street
Winslow, ME 04901
Kennebec County
License
Number | 6-01-011-07-8K-01041 |
Type | Manufacturer of firearms |
Expiry | Oct 1, 2021 |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 109 hours conducting this inspection. 529 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Please conduct an FMI compliance inspection for the Type 07 FFL .
Preventative action has been taken and the FFL has been fully educated regarding his responsibilities and it is believed that future compliance can be achieved through a Warning Letter. NCIC and NLETs checks were conducted of the RPs with negative results. The licensee provided a new phone number of 207-680-8669 for the business premises and redacted for residence and cell phone number. Responsible person Patrick Jacques also has a new residence telephone number which is redacted. The FLS database is not correct and should be updated with the new contact information. Recommend FLS be updated to reflect that a Warning Letter was issued on 03/05/2018 via Certified Mail #7006 0810 0002 6795 7965. A recall recommendation was also made. The last inspection date in FLS should now read 03/30/2017. Pll e-mailed to redacted, FFLC, on March 16, 2018.
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 6 violations.
Citation | Description | |
---|---|---|
478.92(a)(1)(ii) | Failure by a manufacturer or importer to mark the frame, receiver, or barrel with information including the model, caliber, and the manufacturer and/or importer's name and location. ๐ | |
478.123(a) | Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. ๐ | |
478.123(b) | Failure by a manufacturer to maintain an accurate record of dispositions to other licensees. ๐ | |
478.123(d) | Failure by a manufacturer to maintain an accurate record of dispositions to non-licensees. ๐ | |
478.124(c)(1) | Failure to obtain a Form 4473 showing the transferee's name, sex, address, date and place of birth, and other required information. ๐ | |
478.124(c)(3)(iv) | Failure to record the date NICS was contacted and the NICS response on Form 4473. ๐ |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data ยป