Jandal Precision Inc
Warning letterThis gun manufacturer was cited for 1 violation. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
Address
357 CR 200
Winters, TX 79567
Runnels County
License
Number | 5-75-399-07-8C-04576 |
Type | Manufacturer of firearms |
Expiry | Mar 1, 2024 |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 23.5 hours conducting this inspection. 98 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
SWBI
The FFLC issued this license showing the premises in Runnels county. The premises is in Taylor county. The licensee correctly listed his premises as being located in Taylor county on his 2009 application. Investigator redacted addressed this issue in his 2009 application narrative, but the license was issued showing Runnels county. The FFLC needs to issue a new license with the correct county of Taylor. Investigator redacted verified this in 2009 and Investigator redacted re-verified this during the inspection. Investigator redacted spoke with the Taylor County Sheriffs Office regarding the premises location. The entrance to the premises and the buildings where business is conducted are located in Taylor county. A small portion of the licensee’s land on the opposite side of the ranch is located in Runnels county.
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 1 violation.
Citation | Description | |
---|---|---|
478.123(a) | Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗 |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »