K&i Outdoors LLC
Warning letterThis gun manufacturer was cited for 1 violation. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
Address
11100 Douglas Rd.
Temperance, MI 48182
Monroe County
License
| Number | 4-38-115-07-8G-06542 |
| Type | Manufacturer of firearms |
| Expiry | Jul 1, 2021 |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 32 hours conducting this inspection. 82 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Please conduct a Disposition Emphasis compliance inspection, to include a complete inventory and review of all ATF Forms 4473 available for the inspection period. Verify ownership, responsible persons status, and contact information. Document each finding, and enter all required information into N-SPECT .
Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) Industry Operations Investigators (Investigators) redacted and redacted conducted an unannounced onsite firearms compliance inspection of type 07, Manufacturer of Firearms, Federal Firearms Licensee K&l Outdoors LLC on December 14, 2016. A closing conference was held with the licensee on December 21, 2016. The inspection was conducted at the licensed business premises located at 11100 Douglas Rd., Temperance, Michigan. The inspection was conducted during the listed business hours (Wednesdays only 9am to 12pm). Present during the inspection was owner and responsible person , Kenneth David Woodard. Mr. Woodard’s identity was verified by redacted issued driver’s license redacted. The inspection was conducted to determine compliance with federal firearm laws and regulations. The inspection period ranged from July 1, 2012 to December 14, 2016. One violation was cited. One violation was cited. An alternate recommendation of a warning letter in lieu of a warning conference is recommended. This is the licensee’s first compliance inspection since receiving the license. One violation was cited. No other problems were found with the licensee’s records.
This inspection involved an inventory of redacted firearms and the examination of redacted Forms 4473 . For the past twelve months the licensee acquired and disposed of approximately redacted firearms. This was the licensee's first inspection. I recommend a warning letter in lieu of a warning conference, and no recall inspection .
A warning conference is prescribed by ATF O 5370.1B because the licensee failed to mark firearms he manufactured. I recommend a warning letter as the most appropriate outcome for the inspection beause the violation did not affect traceability. All the firearms were previously manufactured and properly marked by other manufacturers then accurately documented in the licensee's A&D record. Furthermore, the licensee is a low compliance risk, having no traces, missing or stolen firearms, multiple handgun sales, or trafficking indicators. He was provided with the marking ruling that covers his situation and will be re-inspected in any case within the next 5 years because he holds a type 07 FFL .
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 1 violation.
| Citation | Description | |
|---|---|---|
| 478.92(a)(1) | Failure by a manufacturer or importer to mark frames or receivers with required information. 🔗 |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »