Priority Tool & Machine Inc
P.T.M.
Warning letterThis gun manufacturer was cited for 2 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
Address
897 Midnight Pass
Rockwall, TX 75087
Rockwall County
License
Number | 5-75-397-07-6M-00624 |
Type | Manufacturer of firearms |
Expiry | Dec 1, 2022 |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 40 hours conducting this inspection. 222 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Please make renewal recommendation as license expires 12/1/2016. Conduct a Full Firearms Compliance Inspection with emphasis on SWBI . Obtain EIN and/or SSN for updating Licensing Center records. A full inventory is required. Please obtain the GPS coordinates for the premises. In Nspect add last inspection date and check all applicable boxes (Gun shows, internet sales, and NFA ) as well as add High Risk Inspection.
On March 23, 2016, Investigator redacted initiated a Firearms Compliance Inspection on Priority Tool Inc dba P.T.M. The purpose and scope of this inspection is to conduct a full South West Border Manufacturer of Firearms compliance inspection. Investigator redacted initiated this inspection and presented her Department of Justice, ATF issued credentials as proof of identity. No other Federal, STate, or local agencies participated in this inspection. The review period of the inspection was from March 23, 2015 through March 23, 2016. The violations warrant a Warning Conference. However, due to the licensee having no violations on the previous compliance inspection, Investigator redacted proposes an alternate recommendation of a report of violations, warning letter and no recall inspection (Report of Violations Only) Warning Letter and No Recall Inspection).
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 2 violations.
Citation | Description | |
---|---|---|
478.124(c)(3)(i) | Failure to obtain identification from a transferee or document it on Form 4473. 🔗 | |
478.21(a) | Failure to provide all of the information called for in required forms. 🔗 |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »