Robert Charles Knipstein
R C KnipsteinWarning letter
This gun manufacturer was cited for 5 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
|Type||Manufacturer of firearms|
|Expiry||May 1, 2023|
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 108 hours conducting this inspection. 114 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
The violations disclosed during this inspection meet the criteria for a recommendation of a Warning Conference per ATF O 5370,1B. An alternate recommendation of a Warning Letter is recommended per the following: No firearms were missing from inventory No firearms were disposed of to prohibited persons No traces were associated with this licensee No unreported multiple sales were associated with this licensee No violations were disclosed during previous compliance inspections Please change/update licensee's phone in FLS to: 817-946-0151
WC CALLED FOR ALT. TO WL AND RECALL INSP.
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 5 violations.
|1||478.123(c)||Failure by a manufacturer to properly employ an alternate recordkeeping system. 🔗|
|2||478.102(a)||Failure to conduct or complete a NICS check before transferring a firearm. 🔗|
|3||478.124(a)||Failure to record the transfer of a firearm on a Form 4473. 🔗|
|4||478.92(a)(1)(ii)(D)||Failure by a manufacturer or importer to mark frames or receivers with the city and state where the manufacturer is located. 🔗|
|5||478.123(d)||Failure by a manufacturer to maintain an accurate record of dispositions to non-licensees. 🔗|
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »