The Gun Shop LLCWarning letter
This gun manufacturer was cited for 8 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
|Type||Manufacturer of firearms|
|Expiry||Nov 1, 2022|
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 269 hours conducting this inspection. 178 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
Conduct a DE compliance inspection. redacted.
Area Supervisor recommends an alternate recommendation from Warning Conference to Warning Letter and recall because; 1. This was the licensees first inspection. 2. There were no missing firearms 3. There was only redacted instance of not properly marking a firearm. 4. The licensee has corrected all items they could correct and state they will do better.
A Warning Letter with a Recall is warranted based on the nature of the violations after consideration to the lack of inspection history and that the FFL was not missing firearms. The high error rate on 4473s and in the A&D record warrants the assignment of a recall inspeciton.
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 8 violations.
|1||478.21(a)||Failure to provide all of the information called for in required forms. 🔗|
|2||478.124(c)(1)||Failure to obtain a Form 4473 showing the transferee's name, sex, address, date and place of birth, and other required information. 🔗|
|3||478.124(c)(3)(iv)||Failure to record the date NICS was contacted and the NICS response on Form 4473. 🔗|
|4||478.124(c)(4)||Failure to record on Form 4473 the manufacturer, importer, type, model, caliber or gauge, and serial number of the firearm being transferred. 🔗|
|5||478.124(c)(5)||Failure of the licensee to sign or date a Form 4473. 🔗|
|6||478.126a||Failure to report the sale of two or more pistols or revolvers to an individual during five consecutive business days. 🔗|
|7||478.123(a)||Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗|
|8||478.92(a)(1)||Failure by a manufacturer or importer to mark frames or receivers with required information. 🔗|
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »