Z & S Specialties, LLC
Black Knight Firearms
Warning letterThis gun manufacturer was cited for 2 violations. The inspection resulted in a warning letter.
A warning letter is the least severe action the ATF can take against a licensee with compliance issues. The letter advises the licensee to comply with regulations.
Address
1822 7th Street East
Mobridge, SD 57601
Walworth County
License
| Number | 3-46-129-07-8G-01025 |
| Type | Manufacturer of firearms |
| Expiry | Jul 1, 2021 |
Inspection Timeline
Compliance inspections are conducted by one or more ATF officers. After the lead investigator submits a recommendation, one or more ATF supervisors will review the inspection and either concur with or adjust the recommendation.
This page contains information about a single inspection conducted between 2015 and 2017. The ATF may have inspected this licensee before and/or after the inspection detailed here.
Officers spent a total of 86 hours conducting this inspection. 245 days passed between the assignment and the final review. The licensee received a final outcome of warning letter.
Hover over underlined text to see definitions of common terms.
M-8: MANUFACTURER CONDUCT FULL MANUFACTURER DE COMPLIANCE INSPECTION
The licensee has been licensed since 2012. He had a change of address and a renewal without having a follow-up inspection to his qualification inspection. Due to the fact that this is his first compliance inspection, has minimal sales (2 in the past 12 months) and has minimal manufacturing since the begining of his FFL I am recommending a WL ONLY and Recall inspection . He is also due for renewal in 2018. The FFL was advised of the requirements and importance to notify ATF and submit ATF F 3310.11 timely. He was also advised of the requirements and importance of making timely inputs to the A&D record book. The FFL appeared to take things seriously and was cooperative in correcting each instance immediately.
WL sent 6/8
Violations
If an inspection uncovers regulatory violations, the licensee receives a report outlining these violations. This section lists the violations found in the inspection, as well as a general description of each offense. More details on the nature of the licensee's specific violations may be found in the report PDF.
This licensee was cited for 2 violations.
| Citation | Description | |
|---|---|---|
| 478.123(a) | Failure by a manufacturer to maintain an accurate record of firearms manufactured or acquired. 🔗 | |
| 478.39a | Failure to appropriately report the theft or loss of a firearm from a licensee's inventory. 🔗 |
Source: Bureau of Alcohol, Tobacco, Firearms and Explosives. About the data »